agmcontainer Manual Relief Valve TA321

agmcontainer Manual Relief Valve TA321

This minimum profile Manual Relief Valve has a captive knurled twist knob for hand operation. The valve is black anodized and can be used in thin wall containers.  It mounts through a 0.50 in. (13 mm) diameter hole. Meets MS18014-1.

Materials    Housing - Aluminum
Finish    Housing - Anodize
Mounting Requirements    Nut & gasket, provided with each valve
Mounting Hole Diameter    0.50 ± 0.015 (12.7 ± 0.38 mm)
Installation Torque    15-20 in. - lbs. (1.7-2.3 N•m)
Maximum Wall Thickness    0.08 (2 mm)
Weight    0.013 lb. (6 grams)
Add washer for wall thickness less than 0.02 (0.5 mm). (P/N MS15795-855, order separately.)
For threaded boss installation: 0.468-32 UNS-2B; 0.50 ± 0.015 (12.7 ± 0.38 mm) diameter X 0.02 (0.5 mm) minimum deep counterbore required for thread relief.

The TA321 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.