T2A2R-STL  T3A2H-STL  T4A2H-STL  T5A2H-STL  T6A1G-STL  T6A2G-STL  T8A1K-STL  T8A2K-STLOperation
Mechanically adjustable, continuously engaged friction torque limiter slips in the event of an overload.
Torque at which limiter will slip is field adjustable through the tightening or loosening of a nut.
Adjustment nut is locked in place by set screws when desired torque setting is established.
 
Mounting
Torque limiters can be mounted Through/Mid Shaft or End of Shaft.
Torque limiter slides on shaft and is fixed with set screws and a customer supplied key.
 
Applications
Momentary overload protection.
Torque limiters are not recommended in continuous slip or tension control applications. A SensiFlex® clutch or brake should be used instead.
Maximum RPM varies by model. Please consult the detail sheets (below). Consult engineering if the intended application exceeds the listed maximum RPM.
 
Design Features
No reset required after torque limiter slips.
Torque limiters are bored to suit up to the maximum shown (US & Metric) for easy installation.
Machined pilot for easy mounting of pulley or sprocket.