MACH III M6G2K-STH Couplings

M2G2R-STH   M3G2R-STH  M4G2R-STH  M5G2R-STH  M5G2K-STH  M6G2G-STH  M6G2K-STH  M8G2K-STH  MBG2K-STHOperation
Friction clutch coupling engages with air pressure, spring released when air is exhausted
Torque is linear in response to air pressure applied.
 
Mounting
Set screws and customer supplied key connect the clutch mechanism to one shaft and the coupling hub to a second, fully supported shaft.
Shafts must be accurately aligned to prevent premature failure.
Anti-rotation arm required to prevent rotation of the air housing.
Clutch couplings are designed for horizontal mounting. If vertical mounting is required, consult engineering for options.
Note: Clutch coupling mechanism DOES NOT support coupling half.
 
Applications
Clutch couplings connect/disconnect two fully supported shafts.
Maximum RPM varies by model. Please consult the detail sheets (below). Consult engineering if the intended application exceeds the listed maximum RPM.
 
Design Features
Both clutch mechanism and coupling half bored to suit up to the maximum shown (US & Metric) to accept differing shaft sizes.
Low coefficient friction lining versions are available for applications requiring slip or a narrower torque range. Contact engineering for details.