ALROC CNPT/630-1-MV-NG

Medium & High Voltage Cable Preparation & Jointing

Alroc CNPT/630-1-MV-NG cable tool kits are used by MV-HV jointers to remove the outer sheath and insulation to prepare the cable ready for the installation of joints, terminations or connectors. This Jointers Tool Kit can be used to:

• Work on and remove the outer sheath
• Remove or work on the shield
• Remove the outer semi-conductor
• Remove the insulation
• Shape the insulation
• Tool kits overview
• Maintain, hang and fix cables

Cable jointing tools included in the kit CNPT/630-1-MV-NG enable the user to splice each layer of distribution underground cable ranging from 50sqmm up to 630sqmm in 12/20 kV, prior to junctions or cables terminations installation. When pencilling is required (not normally needed for moulded rubber cable accessories) a full, smooth taper is needed to eliminate the possibility of air voids. The semi-conductive layers and resulting reside must be completely removed – this is achieved the jointer using either abrasives or cleaners.

For any other voltage rating, please check the outer diameter capacity of each tools included in the kit.