Package 1
CPVC
Engineered to transfer corrosive chemicals associated with the Water Treatment industry. Not suitable for pumping flammable or combustible liquids.
Applications
Sodium Hypochlorite
Calcium Chloride
Potassium Hydroxide
Calcium Hydroxide
Chlorinated Water
Sodium Bromide

Package 2
Polypropylene
Engineered to transfer corrosive chemicals. Not suitable for pumping flammable or combustible liquids.
Applications
Hydrochloric Acid
Acetic Acid
Sulfuric Acid
Nitric Acid (20%)

Package 3
PVDF
Engineered to transfer concentrated and extremely aggressive chemicals. Not suitable for pumping flammable or combustible liquids.
Applications
Sulfuric Acid – 66 Baume
Concentrated Nitric Acid
Hydrofluoric Acid
Propionic Acid

Package 4
Polypropylene – Meter
Engineered to safely measure and dispense corrosive chemicals. Not suitable for pumping flammable or combustible liquids.
Applications
Hydrochloric Acid
Acetic Acid
Sulfuric Acid
Nitric Acid (20%)

Package 5
PVDF – Meter
Engineered to safely measure and dispense corrosive chemicals. Not suitable for pumping flammable or combustible liquids.
Applications
Sulfuric Acid 66 baume
Concentrated Nitric (98%)
Hydrofluoric Acid
Propionic Acid

Package 6
Stainless Steel
Engineered to transfer mineral acids and suitable chemicals. Not suitable for pumping flammable or combustible liquids.
Applications
Nitric Acid
Citric Acid

Package 7
Aluminum
Engineered to transfer light oils, automotive fluids and lubricants. Not suitable for pumping flammable or combustible liquids.
Applications
Light Machining Oils
Hydraulic Fluid
Motor Oil (Up to 30 wt.)
Anti-Freeze
Lubricating Oil

Package  9
EXP – Electric*
Designed for transferring flammable/combustible liquids and meets the stringent safety requirements of the chemical processing industry.
Applications
Alcohol
Solvents
Xylene
Isopropyl Ether
Aqueous Ammonia
Petroleum Products

Package 10
EXP – Air*
Designed for transferring flammable/combustible liquids and meets the stringent safety requirements of the chemical processing industry.
Applications
Alcohol
Isopropyl Ether
Aqueous Ammonia
Xylene
Petroleum Products
Gasoline
Toluene​
Solvents
*Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.